Luiton LT-925UV

Modified on Thu, 29 Sep 2022 at 01:54 PM

Hints and tricks for setting up the LT-925UV radio

Name Display requires three things:
1. Enter the name for the memory channel on the main page of the programmer
2. Check the Show Name box for the memory channel
3. Go to Settings | Radio Menu Settings to be sure Channel Name Enabled is checked
4. Names are displayed on all channels on both the A and B display. They cannot be set separately.
The radio will be in memory mode when you finish sending a file to it from the programmer.
Use the P3 key with a short touch to toggle between VFO and Memory mode. Both A and B toggle modes
Use the P1 key with a short touch to toggle between A and B

01/13/2016