Cannot Start Cross-Band Repeater Mode in the Yaesu FTM-350 radio

Modified on Mon, Aug 14, 2023 at 2:46 PM

To start cross-band repeat mode in the Yaesu FTM-350 radio, turn the radio off, then turn it back on while holding the key to the left of the power button. Then, turn the left dial to option 11 and press the dial twice to start cross band repeat mode.


If the radio does not respond when you press the dial, check the APRS Modem. The radio cannot enter cross-band repeat mode if the APRS Modem is on. You can disable the APRS Modem either using the RT Systems programming software, or directly from the radio's face by following these steps:


  • Press the SET key
  • Turn the left dial to select to APRS/PKT, then press the dial
  • Turn the left dial to E05 APRS MODEM, then press the dial
  • Turn the left dial to select OFF, then press the dial
  • Press the ESC key twice to close the menu mode


02/17/2014 04:55PM

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article