IC-7300 USB Driver Setup
The IC-7300 has built in USB circuitry. A USB-A to USB-B cable can be used to connect the radio to the computer through the USB port on the back of the radio..
If the radio is connected while it is on, the drivers for this USB circuitry will not load. Without the drivers loaded, there will be no communication between the radio and the computer for any program. Checking in Device Manager, there will be no listing for the radio under Ports - Com and Lpt.
Turn the radio off, count to 10, turn the radio back on. The power on sequence will trigger New Hard Ware found and driver installation.
If the radio is connected while it is on, the drivers for this USB circuitry will not load. Without the drivers loaded, there will be no communication between the radio and the computer for any program. Checking in Device Manager, there will be no listing for the radio under Ports - Com and Lpt.
Turn the radio off, count to 10, turn the radio back on. The power on sequence will trigger New Hard Ware found and driver installation.
04/26/2016
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article