IC-7300 Remote Control
The WCS-7300 Programmer includes remote control abilities that can be used to change frequency to that of another memory channel or change many other settings thus eliminating the need to use the menus of the radio for these commonly used functions.
To engage Radio Control,
Select Settings | Show Remote Control. A screen opens to the right with all the options.
Click Open Port.
If you want to use the programmer again, be sure to click Close Port. The program can do one thing at the time... program memory channels and set mode items or Radio Control
Once back in the programmer, select a memory channel on which you want to operate and press CTRL / left mouse click. The radio will immediately tune to that channel with all the preset options set as shown on the screen. What a great way to save all the specifics for that weekly net.
To engage Radio Control,
Select Settings | Show Remote Control. A screen opens to the right with all the options.
Click Open Port.
If you want to use the programmer again, be sure to click Close Port. The program can do one thing at the time... program memory channels and set mode items or Radio Control
Once back in the programmer, select a memory channel on which you want to operate and press CTRL / left mouse click. The radio will immediately tune to that channel with all the preset options set as shown on the screen. What a great way to save all the specifics for that weekly net.
04/26/2016
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article