Anytone has chosen to release three different radios with the same number. In the past RT Systems has often said that the letters following the number of a radio are not important... well, this is one time they are VERY IMPORTANT.
This information is offered to help you better identify your radio and get the RT Systems programmer that will properly address it's frequency ranges and characteristics. Those programmers are distributed in one package. You need to know which will work with your particular radio.
The radios we have that were used for development did carry different labels. Check the label on the radio beneath the battery.
AT-3318A and AT-3318USA Notice the blue label with only the 3318UV model identifier.
AT-3318D Notice the orange label and the "D" designation at the upper right.
AT-3318E Notice the green label and the "E" designation at the upper right. This radio is for three bands. (2M, 220MHz and 440MHz.)
The program installation gives you a choice of programmers for this radio. If you are not sure, install them all.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article